Aviation Fuel Supply System Oil Filter Housing RYL50-025W

RYL fuel filters are mainly used in the fuel supply system of aviation system testers and engine test benches to filter out solid particles and colloidal substances in the fuel, effectively controlling the cleanliness of the working medium. RYL-16, RYL-22, and RYL-32 can be directly used in hydraulic systems
send email to us

Products Details

RYL fuel filters are mainly used in the fuel supply system of aviation system testers and engine test benches to filter out solid particles and colloidal substances in the fuel, effectively controlling the cleanliness of the working medium. RYL-16, RYL-22, and RYL-32 can be directly used in hydraulic systems. TECHNICAL DATA Operating pressure:0-1.6 MPa Operating temperature:-55℃--125℃ Operating medium:Fuel,RP-1,RP-2,RP-3 Filtrate precision:1-100μm Alarm pressure of differential pressure: 0.35±0.05 MPa

Filtrate media:Special stainless steel mesh, Stainless steel fiber felt, Glass fibers.

Model Number RYL50-025W
RYL Low Pressure Fuel Filter Housing
50 Diameter: φ50
025 25 micron
W stainless steel wire mesh filter element
DIMENSIONAL LAYOUT
Type RYL/RYLA Flow rates L/min Diameter d H H0 L E Screw thread：MFlange size A×B×C×D Structure Notes
16 100 Φ16 283 252 208 Φ102 M27×1.5 Picture 1 Can be selected from the signal device, bypass valve and release valve according to request
22 150 Φ22 288 257 208 Φ116 M33×2
32 200 Φ30 288 257 208 Φ116 M45×2
40 400 Φ40 342 267 220 Φ116 Φ90×Φ110×Φ150×(4-Φ18)
50 600 Φ50 512 429 234 Φ130 Φ102×Φ125×Φ165×(4-Φ18) Picture 2
65 800 Φ65 576 484 287 Φ170 Φ118×Φ145×Φ185×(4-Φ18)
80 1200 Φ80 597 487 394 Φ250 Φ138×Φ160×Φ200×(8-Φ18)
100 1800 Φ100 587 477 394 Φ260 Φ158×Φ180×Φ220×(8-Φ18)
125 2300 Φ125 627 487 394 Φ273 Φ188×Φ210×Φ250×(8-Φ18)
a. Filtering Materials and Precision: There are three types of filtering materials available for this series of products: Type I is stainless steel special mesh, and the filtering accuracy is divided into 5, 8, 10, 16, 20, 25, 30, 40, 50, 80, 100 microns, etc. Class II is stainless steel fiber sintered felt, with a filtration accuracy of 5, 10, 20, 25, 40, 60 microns, ect; Class III is a glass fiber composite filter material, with a filtration accuracy of 1, 3, 5, 10 microns, ect. b. When the temperature of the working medium and the fuel temperature of the filter material are ≥ 60 ℃, the filter material should be stainless steel special mesh or stainless steel fiber sintered felt, and the filter element should be fully welded with stainless steel; If the fuel temperature is ≥ 100 ℃, special instructions should be given during selection. c. When the selection of pressure difference alarm and bypass valve filters requires the use of a pressure difference alarm, it is recommended to use a visual type pressure difference alarm with alarm pressures of 0.1MPa, 0.2MPa, and 0.35MPa. Visual alarm on site and remote telecommunication alarm are required. When there is a high demand for flow rate, it is recommended to install a bypass valve to ensure normal fuel supply in the fuel system when the filter is clogged and an alarm is triggered. d. Selection of oil drain valves above RYL-50. It is recommended to consider adding an oil drain valve when selecting. The standard oil drain valve is a manual switch RSF-2. Below RYL-50, it is generally not installed. In special cases, it can be selected according to requirements: screw plugs or manual switches.

Previous:PHB High Pressure Line Filter

Next:Replacement 100lpm 10 micron Internorman In-line Filter Element 311574

Oil Purifier Machine, Aircraft Fuel Filters, Busch Exhaust Filter, Gas Filter Coalescer, Exhaust Oil Mist Filter, Dust Collector Filter, Marine Oil Filter, Oil Coalescer Filter, Hydraulic Filter Assembly, Lube Filter Element,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours